There’s a high possibility that all of your jewelry, from the more casual pieces you wear on a daily basis to the more formal ones you save for special occasions, might benefit from a thorough cleaning. While some don’t clean their jewelry very much at all, other folks are obsessive about keeping it sparkling clean. When it comes to cleaning your Celtic jewelry, you should proceed with caution due to the fact that jewelry may be easily damaged. Too much rinsing and rubbing may cause additional damage and early wear, yet not washing it enough might lead your cherished items to deteriorate over time. Depending on the piece of Irish jewelry in question, there are a few different considerations to make. The following are a few of the tried-and-true methods and suggestions for keeping your jewelry from The Irish Jewelry Company safe and ensuring that it always looks its best.

Using An Ultrasonic Cleaner

Even while ultrasonic cleaners for jewelry are fantastic for cleaning metals, diamonds, and even certain gemstones, you shouldn’t use them in the following situations:

  • Pearls, coral, turquoise, and ivory are all examples of biological jewels.
  • A crack in a gemstone that has been filled with oil, resin, or glass. For example, since the majority of emeralds include fracture filling, they must not be cleaned with an ultrasonic cleaner.
  • Gems that have had a coating applied to them. For example, since Mystic Fire Topaz had been treated with an azotic coating, they must not be cleaned with an ultrasonic cleaner.
  • Gemstones that have been subjected to heat treatment.
  • It is not a good idea to clean gemstones in an ultrasonic cleaner if they are the kind that is easily damaged by heat or sudden shifts in temperature, such as tanzanite, iolite, opal, and so on.

Simple and Risk-Free Cleaning Methods for Jewelry

The process of cleaning and polishing jewelry using cloth, some warm water, a little dish soap, and a gentle bristle brush are all you need to clean precious stones like diamonds and gemstones. To clean your jewelry, place it in a dish of warm soapy water, then rinse it completely. Use a clean, lint-free cloth to dry your work.

Cleaning Pearl Jewelry

Pearls and other softer gems are susceptible to scratching because of their softness. Pearls should be cleaned in warm water that has a very little amount of dish soap added and a very gentle brush. After thorough rinsing, put your pearls out to dry on a chamois or a clean towel. Due to the fact that silk thread may stretch, it is advisable to let the pearls rest until the strand is totally dry.

Instructions For Making A Jewelry Polishing Solution

Simply following these procedures will allow you to produce your own jewelry cleaner at home, which will help keep the luster of your diamond and gold jewelry. Note: this should not be done on rhodium plated or gold plated jewelry. 

  • Combine 1 milliliter of dishwashing liquid with 1 liter of hot water.
  • Add a half teaspoon of a home cleaner that is based on ammonia (like a glass cleaner such as Windex)
  • After letting your jewelry sit in the solution for about five minutes, clean it carefully with a soft toothbrush.
  • Dry by exposing them to air or patting them dry with a paper towel or a standard cloth.
  • Observe how it glistens and ignites in the sunlight.
  • (It is very important that you do not clean jewelry with chlorine or rubbing alcohol.)

PRO JEWELRY CLEANING TIPS

  • For areas that are difficult to access, you might try using dental floss that is not waxed or a toothpick.
  • You might also think about obtaining a diamond polisher, which comes in the form of a cream most of the time, in order to bring out the full brilliance of your diamonds.